Masks and respirators are essential personal protective equipment (PPE) used to protect people from airborne hazards, including particles, vapors, and gases. Cartridges and filters play a key role in these masks and respirators by providing users with an additional layer of protection against airborne pollutants. These filters can be installed in both reusable and disposable masks and respirators, however, the type of filter used often depends on the specific application being performed.
The most common type of filter found in masks and respirators is the particulate filter. These are designed to trap airborne particles such as dust, pollen, and smoke. The particulate filter is typically made with a pleated web of strong synthetic fibers. As air passes through the filter, the fibers trap the particles in the air, allowing only clean air to pass through. Particulate filters are available in various levels of filtration efficiency, with most offering 95 percent filtration or higher.
Gas and vapor cartridges are also commonly included in masks and respirators. These filters are designed to trap gases and vapors like organic vapors and acid gas. They work by adsorbing the gas or vapor onto a chemical absorbent within the filter. This prevents the gas or vapor from entering the mask wearer’s breathing zone. Gas and vapor cartridges are also available in various levels of filtration efficiency, ranging from 95 percent to 99.97 percent, depending on the type of gas or vapor being filtered.
Reusable masks and respirators often include multiple cartridges or filters that can be swapped out for different purposes. For example, one filter may be designed to filter out particulate matter while another filter may be designed to filter out gas and vapor. This allows workers to quickly and easily switch between different types of filters depending on the task they’re performing, without having to replace the entire mask or respirator.
Finally, some masks and respirators come with combination cartridges and filters. These filters may include both a particulate filter and a gas and vapor cartridge in a single unit. These combination filters may be ideal for applications where both types of protection are needed. Combination filters are available in various sizes, depending on the type of protection required. Typically, the larger the filter, the higher the level of protection it provides.
Using the right cartridges and filters in masks and respirators can make all the difference when it comes to keeping people safe from airborne hazards. Taking the time to choose the right filter for the job can help ensure that workers are adequately protected from the risks of their job. Using the wrong type of filter could result in an inadequate level of protection and put workers at risk.